11.3.12 Pinch Roll/Feed Bearing/Pinch Spring
Removal
1. Remove the Top Cover (REP 11.3.7).
2. Grasp the Pinch Roll and remove it from the Top Cover (See Figure 11.3.12.1).
NOTE: The Feed Bearings come off along with the Pinch Roll.
3. Remove the two Feed Bearings from the Pinch Roll (See Figure 11.3.12.1).
4. Lift off the Spring from the Top Cover (See Figure 11.3.12.1).
FRONT
Figure 11.3.12.1 Pinch Roll/Feed Bearing/Pinch Spring Removal
Envelope Feeder Option
6/98
www.printcopy.info
11-24
SAS4D2FA
Xerox DocuPrint N17 Service Manual