Exit Motor Cw (Clockwise) Operation - Xerox DOCUPRINT N17 Service Manual

5.2.1.15 Exit Motor CW (Clockwise) Operation

This diagnostic tests the Exit Motor clockwise function.
Execute Exit Motor CW Operation:
1 Enter Diagnostics Mode 1. The LCD displays PRINT COUNTER OPERATION indicating the
printer is in Diagnostics Mode 1.
2 Press the MENU UP (1) or MENU DOWN (5) key until the LCD displays the EXIT MOTOR-CW
OPERATION message .
3 Press the ENTER key to execute the test. The LCD displays the EXIT MOTOR-CW message.
EXIT MOTOR-CW
Operation EXECED
4 Verify that each time the ENTER key is pressed the Exit Motor rotates clockwise.
5 If you wish to exit this test and enter another test use the MENU UP (1) or MENU DOWN (5) key
to scroll to another test.
6 To exit this test and return to normal operation, switch OFF the printer power then switch it ON.
General Procedures/Information
3/99
www.printcopy.info
5-44 Xerox DocuPrint N17 Service Manual