Front Tray - Xerox DOCUPRINT N17 Service Manual

Hide thumbs Also See for DOCUPRINT N17:

Table of Contents

4.3.3 Front Tray

1 Press the top of the Front Tray Cover Assembly to release the latch and open the tray.

2 Remove the Front Tray Cover ( REP 4.3.4 Front Tray Cover ).

3 Lift the front tray slightly and disengage the Tray Stopper Arm from the right side of the Front Tray

Cover Assembly. (See Figure 4.3.3.1.)

4 Press the sides of the cover inward on both ends to flex the cover hinge pivots out of the holes.

5 Remove the Front Cover from the Front Tray Cover Assembly.

Perform the removal steps in reverse order.

Repair/Adjustment Procedures

Figure 4.3.3.1 Tray Cover Removal

www.printcopy.info

Xerox DocuPrint N17 Service Manual

Table of Contents