Electrical Module I; Control Panel Assembly - Xerox DOCUPRINT N17 Service Manual

Hide thumbs Also See for DOCUPRINT N17:

Table of Contents

4.11 Electrical Module I

1 Remove the Top Cover Assembly ( REP 4.2.6 Top Cover Assembly ).

2 Turn the Top Cover over.

3 Disconnect P33 from the Control Panel. (See Figure 4.11.1.1.)

4 Open and release the hooks that lock the Control Panel Assembly. Spread the hooks wider apart;

then lift and remove the Control Panel Assembly. (See Figure 4.11.1.1.)

Perform the removal steps in reverse order.

Repair/Adjustment Procedures

Figure 4.11.1.1 Control Panel Assembly Removal

www.printcopy.info

Xerox DocuPrint N17 Service Manual

Table of Contents