10.3.8 Duplex Sensor Assembly
Removal
1 Remove the Duplex PWB Assembly ( REP 10.3.7 Duplex PWB Assembly ).
2 Press the claws of the Duplex Sensor Assembly inward to disengage and pull the Duplex Sensor
Assembly, together with the harness, off the Duplex Module.
Replacement
Perform the removal steps in reverse order.
Xerox DocuPrint N17 Service Manual
Figure 10.3.8.1 Removing the Duplex Sensor Assembly
www.printcopy.info
6/98
10-15
SAS489F
Duplex Module Option