Duplex Pwb Assembly - Xerox DOCUPRINT N17 Service Manual

Hide thumbs Also See for DOCUPRINT N17:

Table of Contents

10.3.7 Duplex PWB Assembly

1 Remove the Duplex Cover ( REP 10.3.4 Duplex Cover ).

2 Press/pull out the pin that secures the Duplex PWB Assembly.

3 Slide the Duplex PWB Assembly upward to remove it from the Duplex Module.

4 Disconnect the three Connectors connected to the PWB Assembly.

Perform the removal steps in reverse order.

Duplex Module Option

Figure 10.3.7.1 Removing the Duplex PWB Assembly

www.printcopy.info

Xerox DocuPrint N17 Service Manual

Table of Contents