Drive Assembly - Xerox DOCUPRINT N17 Service Manual

4.10.2 Drive Assembly

Removal
1 Remove the BTR Chute Assembly ( REP 4.7.2 BTR Chute Assembly ).
2 Remove the Main Motor Assembly ( REP 4.10.1 Main Motor Assembly ).
NOTE: It is not necessary to completely remove the Print Engine Controller to access the Drive
Assembly securing screws.
3 Partially remove the Print Engine Controller ( REP 4.12.3 Print Engine Controller ).
4 Remove the four screws securing the Drive Assembly to the Frame. (See Figure 4.10.2.1.)
5 Remove the screw securing the "P" clamp.
6 Pull the Drive Assembly towards the front of the printer and remove the Assembly.
Replacement
Perform the removal steps in reverse order.
Repair/Adjustment Procedures
Figure 4.10.2.1 Drive Assembly Removal
SAS457F.CDR
6/98
www.printcopy.info
4-52
SAS457FC
Xerox DocuPrint N17 Service Manual