Duplex Motor Assembly - Xerox DOCUPRINT N17 Service Manual

10.3.10 Duplex Motor Assembly

Removal
1 Remove the Duplex PWB Assembly ( REP 10.3.7 Duplex PWB Assembly ).
2 Remove the two screws which secure the Duplex Motor Assembly to the Duplex Module.
3 Remove the Earth Spring attached to the Drive Motor.
4 Remove the Duplex Motor Assembly together with the harness.
SAS491FA
Replacement
Perform the removal steps in reverse order.
Xerox DocuPrint N17 Service Manual
Figure 10.3.10.1 Duplex Motor Assembly
6/98
www.printcopy.info
10-17 Duplex Module Option