Paper Size Switches - Xerox DOCUPRINT N17 Service Manual

Hide thumbs Also See for DOCUPRINT N17:

Table of Contents

12.6.4 Paper Size Switches

1. Disconnect the AC power and remove the Rear Access Cover.

2. Disconnect P/J8 from the Controller PWB. Make the measurements

listed in Table 1. All measurements are correct.

Go to step 3.

N: Check the wiring between the Paper Size Switches and P8. If

OK, replace the defective switch (12.2.4).

Table 12.6.4.1 Table 1. Paper Size Switches

Paper Length Guide set to:

3. Reconnect P/J8. Reconnect AC power. Make the measurements listed

in Table 2 at P/J7 on the Controller PWB. The measurements are

Go to step 4.

N: Replace the Controller PWB (12.2.3).

Paper Length Guide set to:

4. Check the wiring between the P/J8 and the printer connector. If OK, it appears to

be a printer problem.

Xerox DocuPrint N17 Service Manual

Table 12.6.4.2 Table 2. Paper Size Voltage

www.printcopy.info

Denotes Pin #1

High Capacity Feeder Option

Table of Contents