Tray Menu - Xerox DOCUPRINT N17 Service Manual

5.1.4.5 Tray Menu

The Tray Menu allows you to access tray settings that are common to all system languages (PCL and
PostScript). To select the Tray Menu:
1 Press the MENU UP (1) or MENU DOWN (5) key until "Tray Menu" is displayed.
2 Press the ITEM UP (2) or ITEM DOWN (6) key to move through the Tray submenu.
3 Press the VALUE PLUS (3) or VALUE MINUS (7) key to select options from the submenu.
4 When the desired submenu option is displayed, press ENTER.
Job Menu
1
Password Menu
Tray Menu
PCL Menu
System Menu
Parallel Menu
Serial Menu
2
Ethernet Menu
Token Ring Menu
3
Novell Menu
4
Print Menu
5
Reset Menu
1
Appears only when the hard drive is installed.
2
Appear only when the option is installed.
3
Appears only when Novell is enabled from the
Ethernet and Token Ring menus.
4
This was formally called the Test Menu
5
Appears only when ONLINE and ENTER are
pressed simultaneously at Power On.
Xerox DocuPrint N17 Service Manual
Figure 5.1.4.5.1 Tray Menu
Envelope Size
Envelope Type
MBF Size
2
MBF Type
Tray 1 Type
Tray 2 Type
Tray 3 Type
Tray Sequence
www.printcopy.info
Com 10 (4.125x9.5) DL (110x220)
C5 (162x229) Monarc (3.87x7.5)
Same as MBF Type, below
Statmt (5.5x8.5) A4 (210x297)
Exec (7.25x10.5) B5-ISO (176x250)
Letter (8.5x11) Com 10 (4.125x9.5)
Legal (8.5x14) C5 (162x229)
Folio (8.5x13) DL (110x220)
A6 (105x148) Monarc (3.87x7.5)
A5 (148x210)
Plain* Labels
Preprinted Bond
Letterhead Recycled
Transparency Color
Prepunched Cardstock
MBF-1 MBF-3-2-1
MBF-2 MBF-2-3-1
MBF-3 MBF-1-2-3
MBF-2-1 1-MBF
MBF-3-1 2-1
MBF-2-3 3-1
MBF-3-2 2-3
3/99
5-11
User type 1
User type 2
User type 3
User type 4
User type 5
3-2
2-3-1
3-2-1
1-2-3
Off*
General Procedures/Information