Duplex Pinch Roll (Connector Chute Side) - Xerox DOCUPRINT N17 Service Manual

10.3.6 Duplex Pinch Roll (Connector Chute Side)

Removal
1 Remove the Connector Chute ( REP 10.3.5 Connector Chute ).
2 Press the Duplex Pinch Roll from behind to remove it from the Connector Chute.
3 Remove the Pinch Spring from the hook.
Pinch Spring
Figure 10.3.6.1 Removing the Duplex Pinch Roll (Connector Chute Side)
Replacement
Perform the removal steps in reverse order.
Xerox DocuPrint N17 Service Manual
Duplex Pinch Roll
6/98
www.printcopy.info
10-13
SAS487F
Duplex Module Option