Duplex Refeed Roll - Xerox DOCUPRINT N17 Service Manual

4.5.3 Duplex Refeed Roll

Removal
1 Remove the Paper Handling Unit Assembly ( REP 4.5.1 Paper Handling Unit Assembly ).
2 Position the Paper Handling Unit Assembly on the gear side.
3 Pull slightly on the latch; then remove the Duplex Refeed Roll by lifting it upward. (See Figure
4.5.3.1.)
NOTE: The Duplex Refeed Roll is located next to the Feed Roll.
Replacement
Perform the removal steps in reverse order.
Repair/Adjustment Procedures
Figure 4.5.3.1 Duplex Refeed Roll Removal
SAS417F.CDR
6/98
www.printcopy.info
4-22
SAS44_3F
Xerox DocuPrint N17 Service Manual