Skips/Smears - Xerox DOCUPRINT N17 Service Manual

Skips/Smears

Print a System Controller Test Pattern with the print resolution set to 600 dpi. Inspect the process
direction ladder chart test pattern. The pattern should be free from skips and smears and lines
should exist in the side-to-side scan direction, Figure 7.5.3.9.
The test prints are free from skips and smears.
Y: Go to the Spots checkout on the next page.
N: Go to RAP 7.5.23 Skips/Smears.
Xerox DocuPrint N17 Service Manual
Figure 7.5.3.9 Skips/Smears
area in
ladder chart
SAS1025
7/99
www.printcopy.info
7-87 Repair Analysis Procedures (RAPs)