Bottom Cover/Tray Extension - Xerox DOCUPRINT N17 Service Manual

11.3.3 Bottom Cover/Tray Extension

Removal
1. Place the Envelope Feeder on its right Side.
2. Remove the two screws which secure the Bottom Cover.
3. Pull out the Tray Extension completely and move it upward (to the right in Figure 11.3.3.1) about 5cm
(See (1) in Figure 11.3.3.1) and remove the Bottom Cover from the Main Chassis (See (2) in Figure
11.3.3.1).
4. Remove the Tray Extension from the bottom of the Envelope Feeder (See (3) in Figure 11.3.3.1).
Replacement
Perform the removal steps in reverse order.
NOTE: First reinstall the Tray Extension and then the Bottom Cover.
Envelope Feeder Option
2
Figure 11.3.3.1 Bottom Cover and Tray Extension Removal
www.printcopy.info
3
6/98
11-10 Xerox DocuPrint N17 Service Manual
1
FRONT
SAS4C5FA