Rear Cover - Xerox DOCUPRINT N17 Service Manual

9.3.5 Rear Cover

Removal
1 Remove the OCT Unit ( REP 9.3.1 OCT Unit) .
2 Put the OCT Unit upside down with the rear directed to you.
3 Press the end of the left spring towards you and then inward (to the right) to disengage.
4 Press the end of the right spring in the same manner.
5 Remove the Rear Cover downward.
Replacement
Perform the removal steps in reverse order.
Offset Catch Tray (OCT) Option
Figure 9.3.5.1 Removing the Rear Cover
6/98
www.printcopy.info
9-12
SAS4A6FA
Xerox DocuPrint N17 Service Manual