Confirm Registration Solenoid Operation - Xerox DOCUPRINT N17 Service Manual

Hide thumbs Also See for DOCUPRINT N17:

Table of Contents

5.2.1.11 Confirm Registration Solenoid Operation

This diagnostic tests the Registration Solenoid

Execute Confirm Registration Solenoid Operation:

1 Enter Diagnostics Mode 1. The LCD displays PRINT COUNTER OPERATION indicating the

printer is in Diagnostics Mode 1.

2 Press the MENU UP (1) or MENU DOWN (5) key until the LCD displays the CONFIRM REG

SOLENOID OPERA. message .

3 Press the ENTER key to start the test. The LCD displays the CONFIRM REG message.

Operation EXECED

4 Verify that the Registration Solenoid energizes momentarily each time the ENTER key is pressed

5 If you wish to exit this test and enter another test use the MENU UP (1) or MENU DOWN (5) key

to scroll to another test.

6 To exit this test and return to normal operation, switch OFF the printer power then switch it ON.

General Procedures/Information

www.printcopy.info

Xerox DocuPrint N17 Service Manual

Table of Contents