Rep 13.5 Exit Pinch Roll; Rep 13.6 Exit Sensor Assembly - Xerox DocuPrint N2125 Service Manual

REP 13.5 Exit Pinch Roll

Parts List on PL 12.1
Removal
Switch off the power and disconnect the Power Cord.
1. Remove the Envelope Feeder from the printer.
2. Remove the Bottom Cover (REP 13.1).
3. Remove the Top Chute (REP 13.2).
4. Carefully pry up on either end of the Pinch Roll until it is free of the mounting
5. Remove the Exit Pinch Roll (Figure
Figure 1 Exit Pinch Roll
Replacement
1. Reinstall the components in the reverse order.
Initial Issue
DocuPrint N2125
WARNING
1).

REP 13.6 Exit Sensor Assembly

Parts List on PL 12.1
Removal
Switch off the power and disconnect the Power Cord.
1. Remove the Envelope Feeder from the printer.
2. Remove the Bottom Cover
3. Remove the Top Chute
(Figure 1). 4. Release the four locking tabs and remove the Exit Sensor
Replacement
1. Reinstall the components in the reverse order.
02/2000
4-105
WARNING
(REP 13.1).
(REP 13.2).
(Figure
Figure 1 Exit Sensor Assembly
REP 13.5, REP 13.6
1).
Repair-Adjustment