RRP 2-2High Capacity Feeder Rear Cover (PL 12.1)
Rear Cover
Fig 2-7 High Capacity Feeder Rear Cover
Removal
1.
Remove the two machine screws securing the Rear Cover to the High Capacity
Feeder frame.
2.
Pull up on the Rear cover and remove it from the frame.
Replacement
1.
Slip the two tabs that are located at the bottom of the Rear Cover into the
openings at the bottom of the High Capacity Feeder frame.
2.
Slide the edges the Rear Cover into the groves in the Left and Right Covers.
3.
Use two machine screws to secure the Rear Cover to the High Capacity
Feeder frame.
2-420
DocuPrint N4525 Network Printer - Service Guide
S4525-196