Table of Contents
Advertisement
#"
To prevent the L2W-323 Gateway from making or receiving bonded calls
•
In the Miscellaneous WAN parameters screen, clear the Enable Bonding check box
and click Next.
Setting LAN Port Parameters
Define the LAN port's IP address in the LAN Port Settings screen. The IP address of the
LAN port is the same address as the Gateway IP address and of the internal Gatekeeper.
Figure 25 - LAN Port Settings screen
The LAN Port Settings screens display the following parameters:
Port Number – displays the port number you are configuring. This is a read-only parameter.
Enabled – allows you to enable or disable this port. The default for LAN Port 1 is Enabled.
Port Type – displays the type of LAN access method. This is a read-only parameter.
MAC Addr. – displays the hardware Media Access Control address for this LAN port. This
is a read-only parameter.
IP Address – allows you to define the IP address of this LAN port.
IP Mask – allows you to define the portion of the IP address used for sub-network
definitions.
Setting the Gateway Parameters
5-21
Advertisement
Table of Contents
