Table of Contents
Advertisement
The Configuration Source screen allows you to
!" Modify the unit configuration password.
!" Access the internal Gatekeeper configuration and the Gateway configuration.
!" Select a Gateway configuration source file with specific parameter settings.
Configuration Source Screen Parameters
The upper area of Configuration Source screen contains the following read-only parameters:
Unit Type – displays the type of RADVision unit you selected for configuration.
Hardware Version – displays the hardware version of the selected unit.
Software Version – displays the first two digits of the unit software version. The ellipsis
button (...) displays the full software version and other software related information. For
more information, see "Viewing Software Version Details," page 5-5.
The middle and lower area of the Configuration Source screen contain parameters that allow
you to:
!" Modify the unit configuration password. See "Modifying the Password," page 5-6.
!" Access the internal Gatekeeper configuration. See "Setting the Gatekeeper Mandatory
Parameters," page 5-8.
!" Access the Gateway configuration and select a Gateway configuration source file with
specific parameter settings. See "Setting the Gateway Parameters," page 5-14.
Viewing Software Version Details
You can view version details about the various software modules used in the L2W-323
Gateway you are configuring.
Selecting the Gateway Unit
5-5
Advertisement
Table of Contents
