Led Indications - RADVision L2W-323 User Manual

LED Indications

The Power LED does not light
This indicates that the L2W-323 Gateway is not properly connected to the power source.
Make sure the power cable is firmly connected to the Gateway and to the power outlet.
The Link LED of a connected LAN port does not light
This indicates that the LAN port is not connected to the network segment. Make sure that
the connections are secure, you are using a correct Ethernet cable and connector, and the
devices at both ends of the Link are powered-up. For the LAN connector pin-out, see
Appendix A, "Cable Connectors and Pin-outs."
9-1