RADVision L2W-323 User Manual page 168

Using the L2W-323 Gateway
#"
To forward a call to another endpoint on the LAN
•
Dial the forwarding prefix followed by the number of the endpoint to which you want
to forward all calls.
Example:
*72 5531
Where *72 is the forwarding prefix and 5531 the number of the endpoint to which all calls
are forwarded.
In this example the destination is either in the same zone as the forwarding endpoint or in
another zone but no zone prefixes or exit zone prefixes are defined. If either an exit zone
prefix is defined for the zone of the forwarding endpoint, or a zone prefix is defined for the
destination endpoint, the prefixes must be added to the dialed string after the forwarding
prefix.
Example:
*72 03 20 5531
Where *72 is the forwarding prefix, 03 is the exit zone prefix of the forwarding endpoint, 20
is the zone prefix of the destination endpoint and 5531 the destination endpoint number.
#"
To forward all calls to a group of terminals on the LAN
•
Dial the forwarding prefix followed by the service assigned to the group of terminals
to which you want to forward all calls.
Example:
*72 98
Where *72 is the forwarding prefix and 98 the service assigned to the group of terminals.
#"
To forward 1B video calls through the Gateway to a terminal
•
Dial the forwarding prefix, the 1B video call service prefix and the phone number of
the terminal to which you want to forward all calls.
Example:
*72 82 1816455318
Where *72 is the forwarding prefix, 82 the 1B video call service prefix and the destination
terminal phone number.
7-12