Zone Definition - RADVision L2W-323 User Manual

Zone Definition

A zone is defined by all the endpoints that can register with a single Gatekeeper. All
endpoints that have been configured to register with a Gatekeeper can do so and only one
Gatekeeper is allowed per zone. Although this allows for "plug-and-play" endpoint
additions to the network, you may want to have more control over which endpoints have
access to the zone. This is achieved by further definition the zone
Zone Access Control
The RADVision Gatekeeper can operate in one of two modes: open zone and strict zone,
giving you the choice to control endpoint access to the zone.
In an open zone mode the Gatekeeper accepts registration from all endpoints for which this
Gatekeeper is defined as the default Gatekeeper. This mode allows "plug-and-play"
endpoint additions to the network, but does not give you full access control over the zone.
#"
To configure the Gatekeeper to operate in an open zone mode
1. In the Configuration Source screen click Gatekeeper Setup. The Gatekeeper
Application Parameters screen is displayed.
2. In the Application Parameters screen, click Network Control. The Network Control
screen is displayed.
Zone Definition
6-7