Figure 31 - Spids For The Bri Connection - RADVision L2W-323 User Manual

Assigning SPIDs
The SPID (Service Provider Identification) is a number assigned to an ISDN line that
indicates which services the ISDN device can access. An SPID is usually the ISDN number
with some digits attached to the end. SPIDs can be assigned if you select 5ESS, NI-1
(National ISDN-1) or DMS100 from the Signaling Protocol list; SPIDs are not defined if
the country selected is Europe, Japan, or Taiwan.
You can type one or two SPIDs for the ISDN connection.
Note: When using the 5ESS_PTP protocol, SPIDs should be left blank.
#"
To assign an SPID to an ISDN Connection
1. From the WAN Port Settings – ISDN screen click SPID. The SPID screen is
displayed.
2. Type one or two Service Provider Identifications (SPIDs) for the ISDN connection.
3. Click OK to return to the WAN Port Settings – ISDN screen.

Figure 31 - SPIDs for the BRI connection

Setting the Gateway Parameters
5-29