RADVision L2W-323 User Manual page 199

Viewing Zone Parameters
#"
To view the list of zone parameters
•
Type 7 in the Gatekeeper menu and press Enter.
********************************************************
********************************************************
___________________FLAGS
GK
Accept Registrations
Accept Calls
Everyone Can Register
Alias Assignment
Call Indirect Mode
Dynamic IP Environment
___________________CAPABILITIES and USAGE
Allowed Calls
Ongoing Calls
Online Endpoints
Allowed Total Bandwidth (Kbps)
Allowed Bandwidth Per Terminal (Kbps)
Current Bandwidth Usage (Kbps)
********************************************************
The following information is displayed for the list of zone properties:
Flags
GK – when "on," a Gatekeeper is being used in the zone.
Accept Registrations – when "on," the Gatekeeper accepts new dynamic registrations.
Accept Calls – when "on," the Gatekeeper accepts new calls.
Everyone Can Register – when "on," endpoints not defined in the Zone Definition Table
can register with the Gatekeeper.
Alias Assignment – when "on," the Gatekeeper allocates telephone numbers based on the
predefined information.
Call Indirect Mode – when "on," routes all calls through the Gatekeeper, according to the
H.323 indirect call mode.
Dynamic IP Environment – when "on," the Gatekeeper uses Terminal ID in Zone
Definition to identify the terminal.
Zone Properties
: on
: on
: on
: on
: on
: on
: off
: 25
: 1
: 6
: 1000000
: 1000000
: 768
Monitoring the Gateway
8-25