RADVision L2W-323 User Manual page 196

Servicing the Gateway
Forward Type – the type of forwarding used by the endpoint.
Forward – the alias forwarding information.
Call Signaling Address – the IP address to which the endpoint gets call signaling messages.
Usually, a terminal has one address, while a Gateway has an address for each of its LAN
ports.
RAS Add. – the Registration Admission Status (RAS) address for this terminal. The RAS
address can either be a fixed or dynamic IP address.
Phone – the destination phone number of the endpoint on the IP network.
Terminal ID. – the ID of this endpoint on the IP network.
Endpoint Identifier – the identifier assigned to the endpoint for use by Gatekeeper
application.
Viewing the List of Calls
#"
To view details of calls
•
Type 4 in the Gatekeeper menu and press Enter.
Note: If there are no calls, a "no calls" message displays.
********************************************************
********************************************************
No.From
-- ----
0 192.114.36.77:1051 192.114.36.71:1820,71,8013, CAL_CONNECT 71,
********************************************************
The following information is displayed for the calls:
No. – the call number.
From – the IP address:port number of the origin of the call.
To – the IP address:port number of the destination of the call.
State – the state of the call.
Service – the service that the call is using.
8-22
Calls Table
To State
-- -----
Service
-------