Deleting And Adding Gatekeeper Services - RADVision L2W-323 User Manual

Advanced Gatekeeper Configuration

Deleting and Adding Gatekeeper Services

You can delete all services except for the built-in Gatekeeper services.
#"
To delete a service from the Gatekeeper Services Definition Table
1. From the Services Definition Table, select the service you want to delete and click
Delete.
2. Click OK or Apply for the configuration software to upload the change to the
Gatekeeper.
#"
To add a service to the Services Definition Table
1. From the Services Definition table screen, click Add. The Services Definition screen is
displayed.
2. In the Services Definition screen, type a description and a prefix and set the access
control Default and Public flags. Click OK.
Saving the Service Definitions to a File
You can save the services you define in the Services Definition Table to a file.
#"
To save the Gatekeeper services to a file
1. From the Services Definition Table screen, click Save. The Save As dialog box is
displayed.
2. From the Folders list box, select the folder in which you want to save this file. By
default this is the same directory in which you installed the configuration software.
3. In the File name field enter a file name. '*.srv is the default file extension for service
files is. Click OK.
Note: You can save to files the data collected in all the Gatekeeper Setup screens. The data
of each screen is saved to a file with a different file extension.
6-6