Table of Contents
Advertisement
Figure 34 - Supported Services screen
The Supported Services screen displays the following read-only fields:
Entry – displays the sequential number of the service.
Description – displays a description of the service as set in the Services Definition Table.
Prefix – displays the prefix of the service.
Call Type – displays the type of call defined by this service.
Max. Bit – displays the maximum bit rate per channel of a call defined by this service.
Supported values are 64 Kbps, 128 Kbps, 256 Kbps, 384 Kbps and 768 Kbps.
Restr. Mode – displays whether the call defined by this service is restricted (n x 56 Kbps
instead of n 64 Kbps) .
The Support field indicates whether the service is enabled or disabled for the Gateway BRI
port. A red check mark indicates that the service is enabled.
Enable/Disable – allows you to enable or disable a selected service.
#"
To enable or disable a service for the Gateway BRI port
1. From the Supported Services screen select the service you want to enable or disable.
2. Click the Enable/Disable toggle button. When enabled, a red check mark appears in
the Support field of the service.
3. Click OK to return to the WAN Port Settings – ISDN screen.
Setting the Gateway Parameters
5-33
Advertisement
Table of Contents
