Figure 17 - Change Password Screen - RADVision L2W-323 User Manual

#"
To change the configuration access password
1. From the Configuration Source screen, click Change Password. The Change
Password screen is displayed.

Figure 17 - Change Password screen

2. In the Old Password text box, type your current password. If this is the default
password, type GWrv. The password is case sensitive.
3. In the New Password text box, type the new password.
4. In the Confirm New Password text box, type the new password again for verification.
5. Click OK to confirm. You return to the Configuration Source screen.
The next time you access the configuration of this Gateway, type your new password at the
Enter Password screen.
If you do not know the old password, contact your RADVision representative or technical
support at support@radvision.com and support@radvision.rad.co.il.
Selecting the Gateway Unit
5-7