Defining Gatekeeper Services - RADVision L2W-323 User Manual

Basic Configuration

Defining Gatekeeper Services

You define Gatekeeper services in the Services Definition Table screen. You also use this
screen to load default service files or service files you saved for other unit configurations.
The internal Gatekeeper in the L2W-323 Gateway has five default Gateway services and
four built-in services, only one of which is defined. If you use these services, you do not
have to change any of the default Gateway service settings. We recommend you use these
services, unless your LAN endpoint phone numbers begin with the same numeric string as
the default services; in this case, change the service prefixes to avoid conflicts.
The following table describes the default Gatekeeper services for the L2W-323 Gateway:
Service
Voice call
Video (1 or 2) x 64 Kbps
calls
Video (1 or 2) x 56 Kbps
calls
V.35 256 Kbps calls
V.35 224 Kbps calls
V.35 384 Kbps calls
V.35 336 Kbps calls
Forward
Note: The prefixes used for V.35 services are the same as those used for bonded BRI
services. In addition, you can define services not defined by default; see "Defining
Gatekeeper Built-in Services" in Chapter 6, "Advanced Gatekeeper Configuration."
If the default Gatekeeper services change, you can reload the default services file, as
follows:
5-10
Prefix Definition
9 For voice only calls over one B channel.
82 For video calls using 1B channel or 2B channels.
83 For video calls using 1B channel or 2B channels on
restricted ISDN.
84 For high bandwidth video calls over V.35 or BRI ports.
85 For high bandwidth video calls over V.35 or BRI ports for
restricted ISDN.
85 For high bandwidth video calls over V.35 or BRI ports.
86 For high bandwidth video calls over V.35 or BRI ports for
restricted ISDN.
*72 Allows an endpoint to forward calls to another terminal.