Figure 19 - Gatekeeper Services Definition Table Screen With Default Services - RADVision L2W-323 User Manual

#"
To reload the Gatekeeper default services file
1. From the Application Parameters screen, click Services Definition. The Gatekeeper
Services Definition Table screen is displayed.

Figure 19 - Gatekeeper Services Definition Table screen with default services

2. Click Load. The Open file screen is displayed.
3. Select the gkgwbsrv.srv file, and click OK. The Gatekeeper default services,
corresponding to the Gateway default services, appear in the Gatekeeper Services
Definition Table.
4. From the Services Definition Table screen, click OK. From the Application
Parameters screen, click Exit. The Configuration Source screen is displayed.
To edit the default services, see "Editing the Gatekeeper Default Services" in Chapter 6,
"Advanced Gatekeeper Configuration." Otherwise, proceed to "Setting the Gateway
Parameters," page 5-14.
Setting the Gatekeeper Mandatory Parameters
5-11