Table of Contents
Advertisement
Navigating the Configuration Software Screens
The configuration software comprises of sequential screens that can be accessed through the
Next and Prev buttons. Some screens also have secondary screens that are accessed through
buttons, identified by the name of the screen they invoke. For example, the WAN Call
Parameters screen is a secondary screen of the WAN Port Settings screen and can be
accessed from the WAN Call Parameters button on this screen. Following is a description
of the configuration software navigation buttons.
Button
Shortcut Key
Gateway
Abort
Alt+A
Next
Alt+N
Prev
Alt+P
Finish
Alt+F
Detect
Alt+D
Gatekeeper
Load
Alt+L
Save
Alt+S
Apply
Action
Exits the Configuration program without saving your
changes.
Moves to a subsequent screen, saving any changes you
made.
Moves to a previous screen. If you exit a dialog box
using Prev, changes you make to the information in the
dialog box are saved.
Allows you to save the configuration settings in a file and
upload these settings to the Gateway.
Sends a broadcast message to the network, requesting
identification from any units that have not yet identified
themselves.
Loads a locally saved file.
Saves parameter values of the dialog box to the local
disk as a text file in the directory where you installed the
Configuration Software.
Saves the information to the Gatekeeper without exiting
the Configuration dialog box.
Running Setup
4-7
Advertisement
Table of Contents
