RADVision L2W-323 User Manual page 195

RAS Add. – the Registration Admission Status (RAS) address for this terminal. The RAS
address can either be a fixed or dynamic IP address.
Call Signaling Add. – the IP address where the endpoint gets call signaling messages.
Usually, a terminal has one address, while a Gateway has an address for each of its LAN
ports.
Phone – the destination phone number of the endpoint on the IP network.
Terminal ID. – the ID which this endpoint has on the IP network.
Viewing Details of an Endpoint
#"
To view details of a specific endpoint
1. Type 3 in the Gatekeeper menu and press Enter. You are prompted for the endpoint
number.
2. Type the endpoint number and press Enter.
********************************************************
********************************************************
Allowed Services:
71,,72,,61,,N,N,N,N,N,N,N,N,N,N,N,N,N,N,N,N,N,N,N,N,N,N,N,N,N,N
Supported Services:
N,N,N,N,N,N,N,N,N,N,N,N,N,N,N,N,N,N,N,N,N,N,N,N,N,N,N,N,N,N,N,N
Bandwidth Usage: 0
Endpoint Type: terminal
Forward Type: None
E164 Forward:
H323Id Forward:
Call Signaling Address:
192.114.36.67:1720, len:0 - type:No Route - rec:33-d
RAS Address:
192.114.36.67:0, len:0 - type:No Route - rec:27-s-d
Phone:
800-len:3 -type:Phone -rec:12-s-d
Terminal ID:
Endpoint Identifier:
********************************************************
The following information is displayed for the endpoint:
Allowed Services – displays the services allowed for the endpoint.
Supported Services – displays the supported services for the current endpoint.
Bandwidth Usage – only displays the current call bandwidth consumption in the zone.
Endpoint Type – the type of the endpoint.
Registration:1 Type: 14
Monitoring the Gateway
8-21