Next Step: Configuration - RADVision L2W-323 User Manual

Installing the L2W-323 Gateway

Next Step: Configuration

Now that you have installed the Gateway, you have to configure it. The configuration
process is detailed in the next three chapters. The following table summarizes the
configuration chapters:
Chapter
Preparing for Configuration
Basic Configuration
Advanced Gatekeeper
Configuration
If you are installing and configuring the Gateway for the first time, read Chapter 4,
"Preparing for Configuration" before configuring.
3-12
Description
Gives guidelines for planning the configuration process
as well as instructions for setting up the configuration
terminal with the OnLAN Configure 323 configuration
software.
Guides you through the essential configuration
procedures for the Gateway and the Gatekeeper. Once
these are complete, your Gateway is ready for operation
and you can make LAN to WAN and WAN to LAN calls.
Guides you through the configuration options for the
Gatekeeper not covered in the Basic Configuration
chapter, most of which refer to network resource
administration options.