RADVision L2W-323 User Manual page 190

Servicing the Gateway
Viewing the Gateway Ports Configuration
#"
To view the Gateway ports configuration
•
Type 3 in the Remote Diagnostic Main menu. The Gateway Ports Configuration is
displayed.
********************************************************
********************************************************
Type number associated with one of the following topics
1. Back to Previous Menu
2. LAN Ports Configuration
3. WAN Ports Configuration
********************************************************
Viewing LAN Ports Configuration
#"
To view the LAN ports configuration information
•
Type 2 in the Gateway Ports Configuration menu and press Enter.
********************************************************
********************************************************
GATEWAY Default Router IP: 0.0.0.0
********************************************************
Port IP address
********************************************************
0 192.114.36.71
********************************************************
The following information is displayed for the LAN port:
Gateway Default Router IP – the IP address of the Gateway default router.
Port Number – the number of the LAN port.
IP Address – the IP address of this LAN port.
IP Mask – defines the portion of the IP address that is used for sub-network definitions.
Status – the status of the LAN port. The status may be either "enabled" or "disabled."
8-16
Gateway Ports Configuration
LAN Ports Configuration
IP Mask
255.255.255.0
Status
enabled