RADVision L2W-323 User Manual page 197

Viewing the Details of a Call
#"
To view the details of a call
1. Type 5 in the Gatekeeper menu and press Enter. You are prompted for a call number.
2. Type the call number and press Enter.
********************************************************
********************************************************
Call is to service: 71,
Call is in state: CAL_CONNECT
From 192.114.36.77:1051
to 192.114.36.71:1820
CID Sum:1355. CID:0x5634343434ef020020a1056dc928b060
Information from ARQ. h245-channel address 192.114.36.71:1037
Information of origin
Reg:2 Bandwidth:768000 Stack:548238348
State:Connect Mode:CallSetupConn
Information of destination
Reg:2 Bandwidth:768000 Stack:548238288
Connect Mode CallSetupConn
********************************************************
The following information is displayed for the requested call:
Service – the service that the call is using.
State – the state of the call.
From – the IP address:port number of the origin of the call.
To – the IP address:port number of the destination of the call.
CID – the call identification information.
ARQ h245-channel – the H.245 ID for specific call used by H.323 Stack.
Reg. – the registration number of the endpoint in the Gatekeeper's endpoint table.
Bandwidth – displays the current bandwidth consumption in the zone, (from calls and not
from other applications).
Stack – the H.323 Stack call ID.
ARQ – the RAS Call ID.
State – the call state: connect, disconnect or dialing.
Mode – the call state mode sub type for call states.
Monitoring the Gateway
Call 1
q 1770 6489244
71,8013,
ARQ:548238288
ARQ:548238408 State
8-23