Deleting Users - Eaton i-on16 Administrator's And User Manual

i-on16
The display finally asks you to
press both buttons on any radio
HUD that you want to assign to the
new user.
13. Press both buttons on a radio HUD
that you wish to assign to the user.
If you do not have one for the user
press .
Note: A Duress user cannot have a
remote control or radio HUD.
The keypad gives a double "beep"
confirmation tone. The keypad
display shows that the new user
has been added to the system.
To add another user to the system repeat steps 5 to 13.
Otherwise, press  repeatedly to leave the Menu and save your changes.

Deleting Users

You must be a Master user to delete a user, see page 34. To delete a user:
1. Make sure the display shows the
standby screen.
2. Press .
3. Key in your access code (or
present a tag).
Press  .
4.
Press .
5.
Press  until you see:
6.
Press .
7.
The bottom line of the display
shows the first user in a list of the
users recognised by the system.


Followed by:
















4. Administration
Page 47