Install Intake Air Connector; Install Pcv Pipe With Hoses; Install Isc Pipe - Toyota 7M-GE Repair Manual

EM-14
,ENG!NE M&XlANICAL~ - Engine Tuhe-up
13. lNSTALL INTAKE AIR CONNECTOR
(a) Install the intake air connector to throttle body.
6) Iristall and tighten the two nuts.
li s
s
(cl Tighten the clamp.
Ed) Connect the air valve hose to intake air connector.
i
, -
r
14;: INSTALL PCV PIPE WITH HOSES
(a) install the PCV pipe with hoses to the throttle body
.and cylinder head covers.
I . . /
, (b) . Install and tighten the two bolts.
,r ., F) .:, Connect the No.4 PCV hose to the PCV pipe.
(d) Connect the oxygen sensor wire to the two clam
',
. . . L. ,.
1: .15. INSTALL ISC PIPE
(a) Install the ISC pipe with the two bolts.
'(b) Connect the hoses to the ISC pipe.
,,,1
. . -:
s.
.I