Options - Toshiba e-STUDIO281c Service Handbook

1.3

Options

Platen cover
Reversing Automatic Document Feeder (RADF)
Drawer module
Paper Feed Pedestal (PFP)
Large Capacity Feeder (LCF)
Hanging Finisher
Finisher
Saddle Stitch Finisher
Hole punch unit
Staple cartridge
Bridge kit
Work table
Damp heater kit
FAX unit
2nd line for fax unit
128 MB Expansion memory
512 MB Expansion memory
Wireless LAN module
PCI slot
Scrambler board
Bluetooth module
Antenna
Parallel interface kit
Data overwrite kit
e-BRIDGE ID Gate (HID iClass)
e-BRIDGE ID Gate (MIFARE)
Desk
Harness kit for coin controller
Notes:
1. The bridge kit (KN-3511) is necessary for installation of the finisher (MJ-1022, MJ-1023,
MJ-1024 or MJ-1101).
2. The finisher (MJ-1023 or MJ-1024) is necessary for installation of the hole punch unit
(MJ-6004N/E/F/S).
3. The finisher (MJ-1101) is necessary for installation of the hole punch unit (MJ-6101N/E/F/S).
4. The PCI slot (GO-1060) is necessary for the installation of the scrambler board (GP-1040)
and the parallel interface kit (GF-1140).
5. The antenna (GN-3010) is necessary to enable the wireless LAN module (GN-1040/1041)
and the bluetooth module (GN-2010).
6. Up to 1 antenna (GN-3010) can be connected to the wireless LAN module (GN-1040/1041).
7. When the wireless LAN module (GN-1040/1041) and the bluetooth module (GN-2010) are
installed together, only 1 antenna (GN-3010) can be connected to each.
e-STUDIO281c/351c/451c
SPECIFICATIONS/ACCESSORIES/OPTIONS/SUPPLIES
KA-3511PC / -C
MR-3018
MY-1021 / -C
KD-1011 / -C
KD-1012 A4/LT / A4-C
MJ-1022 / -C
MJ-1023 / -C
MJ-1101
MJ-1024 / -C
MJ-6004 N/E/F/S / E-C (for MJ-1023/1024)
MJ-6101 N/E/F/S (for MJ-1101)
STAPLE-1600 (for MJ-1022)
STAPLE-2000 (for MJ-1023/1024)
STAPLE-600 (for saddle stitcher of MJ-1024)
STAPLE-2400 (for MJ-1101)
KN-3511 / -C
KK-3511 / -C
MF-3511U/E
GD-1200 NA/AU/AS/EU/C/TW
GD-1160 NA/EU-N/C/TW
GC-1181
GC-1230
GN-1040/1041
GO-1060
GP-1040
GN-2010
GN-3010
GF-1140
GP-1060
KP-2004
KP-2005
MH-1700
GQ-1020
© 2005 - 2008 TOSHIBA TEC CORPORATION All rights reserved
1 - 8
08/04