Toshiba e-STUDIO281c Service Handbook page 552

(6) Ask users to reset the user's setting items and to restore the data/information. See the following
for the reset and the restore.
• Printer driver
- Upload them in the "Administrator" menu of TopAccess.
• F-code information, Template registering information, Address book
- Restore them in the "Administrator" menu of TopAccess
• Department management data
- Import them in the "Administrator" menu of TopAccess.
• Image data in the Electronic Filing
- Upload them in the "e-Filing" of TopAccess.
• When the SSL is enabled, perform the setting of the following items again with "Create self-
certificate" of TopAccess.
Country Name
State or Province Name
Locality Name
Organization Name
Organizational Unit Name
Common Name
Email Address
• When wireless LAN is used, perform the setting again on the LCD panel. (only when security
with a certificate is used)
Also, upload the following certificate file with "Install Certificate for Wireless LAN" of TopAc-
cess.
CA certificate
User certificate
(7) Referring to the "FUNCTION LIST FOR MAINTENANCE" list which was printed beforehand, per-
form the re-setting.
• Print out the "FUNCTION LIST FOR MAINTENANCE" list after the formatting. (Refer to the
procedure of (2).)
• While pressing [1] and [3] simultaneously, turn the power ON. (Function Mode)
• Compare the lists which were printed before and after the formatting to check the setting
items having the different setting values. Set the value which was set before the formatting.
• Turn the power OFF.
(8) Referring to the "FUNCTION" list which was printed beforehand, perform the re-setting of the
default setting of the FAX function.
• Press the [USER FUNCTIONS] button.
• Press the [ADMIN] button, enter the password, and then press the [ENTER] button.
• Press the [FAX] button and then the [TERMINAL ID] button to set each item.
• Press the [INITIAL SETUP] button to set each item.
e-STUDIO281c/351c/451c
TROUBLESHOOTING
© 2005 - 2008 TOSHIBA TEC CORPORATION All rights reserved
5 - 146