Toshiba e-STUDIO281c Service Handbook page 164

Classifi-
Code
cation
859-0 Develop- Toner empty
ment detection
859-1
859-2
860-0 Develop- Color auto-
ment toner sensor/
proper range
860-1
setting of OFF
level voltage
861-0 Develop- Color auto-
ment toner sensor/
proper range
setting of
861-1
standard light
amount volt-
age
862-0 Develop- Color auto-
ment toner sensor/
proper range
setting of ref-
862-1
erence plate
output
863-0 Develop- Color auto-
ment toner sensor/
proper range
setting of
863-1
developer out-
put
864 Develop- Color auto-toner sensor/
ment sensor OFF output value
display at power ON
865 Develop- Color auto-toner sensor/
ment reference plate output
value display at power ON
866-0 Develop- Color auto-
ment toner sensor/
abnormal
detection
potential dif-
866-1 Develop-
ference set-
ment
ting of
reference
plate output
867 Develop- Color auto-toner control
ment environment and life light
amount correction setting
e-STUDIO281c/351c/451c
ERROR CODE AND SELF-DIAGNOSTIC MODE
Setting mode (08)
Func-
Items
tion
Y ALL
(color)
M ALL
(color)
C ALL
(color)
Upper limit ALL
(color)
Lower limit ALL
(color)
Upper limit ALL
(color)
Lower limit ALL
(color)
Upper limit ALL
(color)
Lower limit ALL
(color)
Upper limit ALL
(color)
Lower limit ALL
(color)
ALL
(color)
ALL
(color)
Upper limit ALL
(color)
Lower limit ALL
(color)
ALL
(color)
2 - 142
Default
<Accept-
RAM
able
value>
0 M Becomes "1" when
<0-1> detecting the toner
empty.
0 M
0: Normal
<0-1>
1: Empty detected
0 M
<0-1>
20 M Sets the range for judg-
<0-1023> ing whether the sensor
output value when the
0 M
sensor light source is
<0-1023>
OFF is correct
or not.
205 M Sets the range for judg-
<0-255> ing whether the adjust-
ment result of sensor
light amount is correct
40 M
or not.
<0-255>
950 M Sets the range for judg-
<0-1023> ing whether the sensor
output value for the ref-
erence plate is correct
205 M
or not.
<0-1023>
450 M Sets the range for judg-
<0-1023> ing whether the sensor
output value for the
sleeve is correct or not.
155 M
<0-1023>
- M Displays the sensor
<0-1023> output value when the
sensor light source is
OFF at power ON.
- M Displays the sensor
<0-1023> output value with the
standard light amount
for the reference plate
at power ON.
820 M Sets the range for judg-
<0-1023> ing whether the differ-
ence between the
sensor output when the
sensor light source is
205 M
OFF and the sensor
<0-1023>
output for the reference
plate is correct or not.
0 M Sets whether the sen-
<0-1> sor light amount is cor-
rected or not depending
on the environment and
life.
0: Correction
1: No correction
© 2005 - 2008 TOSHIBA TEC CORPORATION All rights reserved
Pro-
Contents cedur
e
14
14
14
4
4
4
4
4
4
4
4
2
2
4
4
1