Toshiba e-STUDIO281c Service Handbook page 154

Classifi-
Code
cation
672 General Initialization of department
management information
675-0 Paper Coated Paper
feeding Mode setting
for paper
source
675-1
675-2
675-3
675-4
e-STUDIO281c/351c/451c
ERROR CODE AND SELF-DIAGNOSTIC MODE
Setting mode (08)
Func-
Items
tion
-
Upper ALL
drawer
Lower ALL
drawer
PFP upper ALL
drawer
PFP lower ALL
drawer
LCF ALL
2 - 132
Default
<Accept-
RAM
able
value>
- SYS Initializing of the depart-
ment management
information
* Enter the code with
the digital keys and
press the [INITIAL-
IZE] button to per-
form the
initialization.
If the area storing
the department
management infor-
mation is destroyed
for some reason,
"Enter Department
Code" is displayed
on the control panel
even if the depart-
ment management
function is not set
on. In this case, ini-
tialize the area with
this code. This area
is normally initial-
ized at the factory.
0 SYS Sets whether or not
<0-1> applying the Coated
Paper Mode to each
paper source.
0: Normal mode
1: Coated Paper Mode
0 SYS
* Coated Paper Mode
<0-1>
- This mode is
selected when the
paper which often
causes the misfeed-
0 SYS
ing (ex. coated
<0-1>
paper) is used. The
occurrence of mis-
feeding is reduced
0 SYS
by lengthening the
<0-1>
jam detection time.
However, the print-
ing speed is low-
0 SYS
ered since the
<0-1>
printing cycle is also
lengthened with the
lengthened jam
detection time.
© 2005 - 2008 TOSHIBA TEC CORPORATION All rights reserved
Pro-
Contents cedur
e
3
4
4
4
4
4