(8)
Press the [START] button.
Updating starts and the processing status is displayed on the LCD screen.
When the FROM basic section software version of the equipment is "V1.00 / 8.22" or earlier:
Status display during update
OS Update .......
HD Data Update .......
UI Data Update .......
SysFirm Update .......
Engine MAIN Update .....Flash Update
Scanner Firm Update..... Flash Update
When the FROM basic section software version of the equipment is "V1.01 / 2.30" or later:
Status display during update
OS UI Update.......
HDD SYS Update.......
Engine MAIN Update .....Flash Update
Scanner Firm Update..... Flash Update
e-STUDIO281c/351c/451c
FIRMWARE UPDATING
Fig. 6-55
Status display when update is completed
OS Update .................... Completed
HD Data Update ............Completed
UI Data Update ..............Completed
SysFirm Update .............Completed
Engine MAIN Update .... Completed
Scanner Firm Update..... Completed
Fig. 6-56
Status display when update is completed
OS UI Update...................... Completed
HDD SYS Update ............... Completed
Engine MAIN Update........... Completed
Scanner Firm Update ..........Completed
© 2005 - 2008 TOSHIBA TEC CORPORATION All rights reserved
6 - 46
06/08