Toshiba e-STUDIO281c Service Handbook page 354

Setting
ON
1 2 3 4 5 6 7 8
ON
1 2 3 4 5 6 7 8
ON
1 2 3 4 5 6 7 8
Note: Note:
Perform the shipping position operation when the finisher is packed again.
e-STUDIO281c/351c/451c
ADJUSTMENT
Item
Lower stack tray The lower stack tray moves down and
motor (down) stops when the lower stack tray lower
limit sensor is turned ON.
Stapler motor The stapler motor stops after the stapling
operation.
Shipping posi- The upper and lower stack trays move to
tion operation the shipping position and stop.
Operation
© 2005 - 2008 TOSHIBA TEC CORPORATION All rights reserved
3 - 88
To stop
• Press SW2 again.
• Turn OFF the joint
sensor (S4).
• Press the stapler
safety switch
(S14).
• Turn OFF the joint
sensor (S4).
• Turn OFF the joint
sensor (S4).