Toshiba e-STUDIO281c Service Handbook page 95

Classifi-
Code
cation
1055 Image Upper limit in toner saving
mode
1056
1057
1058
1060 Image Reproduction ratio fine
adjustment of primary
scanning direction
1065 Image Judgment threshold for
ACS
1066 Image Judgment threshold for
ACS on original set on the
RADF
1070 Image Fine adjust-
ment of back-
ground
1071
1072
1075 Image Fine adjust-
ment of black
density
1076
1077
1080 Image RGB conver-
sion method
selection
1081
1082
1086 Image Sharpness
adjustment
1087
1088
© 2005 - 2008 TOSHIBA TEC CORPORATION All rights reserved
Adjustment mode (05)
Func- <Accept-
Items
tion
PRT
(color)
PRT
(color)
PRT
(color)
PRT
(color)
SCN
(color)
SCN
(color)
SCN
(color)
Text SCN
(color)
Printed SCN
image (color)
Photo SCN
(color)
Text SCN
(color)
Printed SCN
image (color)
Photo SCN
(color)
Text SCN
(color)
Printed SCN
image (color)
Photo SCN
(color)
Text SCN
(color)
Printed SCN
image (color)
Photo SCN
(color)
2 - 73
Default
RAM Contents
able
value>
176 SYS When the value
<0-255> decreases, the printing
density becomes
176 SYS
lighter.
<0-255>
176 SYS
<0-255>
176 SYS
<0-255>
128 SYS When the value
<0-255> increases by "1", the
reproduction ratio of pri-
mary scanning direction
increases by approx.
0.1%.
Effective with the reso-
lution other than 600
dpi.
70 SYS When the value
<0-255> increases, originals
tend to be judged as
70 SYS
monochrome, and
<0-255>
when the value
decreases, they tend to
be judged as color in
autocolor mode.
0 SYS Adjusts the level of
<0-50> background. When the
value increases, the
0 SYS
background becomes
<0-50>
more brightened.
0 SYS
<0-50>
0 SYS Adjusts the black den-
<0-4> sity of the scanned
image. When the value
0 SYS
increases, the black
<0-4>
density becomes
0 SYS
darker.
<0-4>
0 SYS Sets the color space
<0-3> format of the output
image.
0 SYS
0: sRGB
<0-3>
1: AppleRGB
0 SYS
2: ROMMRGB
<0-3>
3: AdobeRGB
0 SYS When the value
<0-31> increases, the image
becomes sharper.
0 SYS
When the value
<0-31>
decreases, the image
0 SYS
becomes softer.
<0-31>
The smaller the value
is, the less the moire
becomes.
* The default value 0
is equivalent to 16
(center value).
ERROR CODE AND SELF-DIAGNOSTIC MODE
Pro-
cedur
e
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
e-STUDIO281c/351c/451c
2