Toshiba e-STUDIO281c Service Handbook page 603

(7) Select the item with the digital keys.
"*" is displayed next to the selected item. Display or delete the "*" by pressing the number of the
item. All items are selected in the default settings.
• Select all items to update the firmware of the equipment in a batch.
• Select items as follows to update individually.
Types of Firmware
System ROM
(OS data)
System ROM
(UI data)
Master data
System ROM
(System firmware)
Engine ROM
Scanner ROM
Example: Updating the master data and system ROM
When the FROM basic section software version of the equipment is "V1.00 / 8.22" or earlier:
When the FROM basic section software version of the equipment is "V1.01 / 2.30" or later:
(Updating all the items is taken as an example and explained in the following procedures.)
© 2005 - 2008 TOSHIBA TEC CORPORATION All rights reserved
<Items vary depending on the FROM basic section software
version of the equipment>
"V1.00/8.22" or earlier
0. OS Update
2. UI Data Update
1. HDD Update
3. System Firmware Update
4. Engine Firmware Update
5. Scanner Firmware Update
Fig. 6-53
Fig. 6-54
6 - 45
06/08
Items
"V1.01/2.30" or later
1. OS UI Update
2. HDD SYS Update
3. Engine Firmware Update
4. Scanner Firmware Update
e-STUDIO281c/351c/451c
FIRMWARE UPDATING
6