Toshiba e-STUDIO281c Service Handbook page 209

Classifi-
Code
cation
3812 Scanner Dummy full mode at the
Internet Fax transmission
3815 Scanner XPS file thumbnail addition
3816 Scanner XPS file paper size setting
3817 Scanner PDF file version setting
3818 Scanner DPWS Scan operation
mode
3819 General Network Fax/Internet Fax
processing mode (STD)
3820 General Network Fax/Internet Fax
processing mode (FINE)
3821 General Network Fax/Internet Fax
processing mode (S-FINE)
© 2005 - 2008 TOSHIBA TEC CORPORATION All rights reserved
Setting mode (08)
Func- <Accept-
Items
tion
ALL
ALL
ALL
ALL
ALL
ALL
ALL
ALL
2 - 187
07/04
Default
RAM Contents
able
value>
0 SYS When an Internet Fax is
<0-1> sent, the resolution ratio
and the paper size of an
attached image are set
to the full mode.
0: Disabled
1: Enabled
If "1: Enabled" is set in
08-3810, set "1:
Enabled" in 08-3812 as
well.
1 SYS Thumbnail is added to
<0-1> the XPS file produced
by the Scan function.
0: Not added
1: Only the top page
added
1 SYS The paper size of the
<0-1> XPS file produced by
the Scan function is set.
0: Scanned image size
1: Standard size
0 SYS The version of PDF file
<0-1> produced by the Scan
function is set.
0: PDF V1.3
1: PDF V1.4
1 SYS The operation mode in
<0-1> the DPWS Scan func-
tion is switched.
0: Batch type
1: Serial type
2 SYS The processing mode
<0-2> of the network Fax/
Internet Fax is
switched.
0: High speed/Low
image quality
1: Standard
2: Low speed/High
image quality
0 The processing mode
SYS
<0-2> of the network Fax/
Internet Fax is
switched.
0: High speed/Low
image quality
1: Standard
2: Low speed/High
image quality
0 SYS The processing mode
<0-2> of the network Fax/
Internet Fax is
switched.
0: High speed/Low
image quality
1: Standard
2: Low speed/High
image quality
ERROR CODE AND SELF-DIAGNOSTIC MODE
Pro-
cedur
e
1
1
1
1
1
1
1
1
e-STUDIO281c/351c/451c
2