Toshiba e-STUDIO281c Service Handbook page 289

Adjustment method 1
<Adjustment procedures (for A3/LD size paper)>
Test pattern (Ladder)
Details of A
Details of B
This adjustment should be applied for each printout of the test pattern. (Skip this if the test pattern is
printed correctly.)
The order of the adjustment, test patterns and codes to be used are listed below.
Order
1
2
© 2005 - 2008 TOSHIBA TEC CORPORATION All rights reserved
A
B
[ Test pattern ]
[ Details of adjustment area ]
Fig. 3-12
Test pattern
1st page
2nd page
3 - 23
Use the image position of M as a
reference and align the image positions of
Y, C and K with this reference.
Code
417
418
e-STUDIO281c/351c/451c
ADJUSTMENT
3