Toshiba e-STUDIO281c Service Handbook page 179

Classifi-
Code
cation
1422 Data HDD data overwriting type
over- setting
write kit
1424 Data HDD data clearing type
over- setting (forcible clearing)
write kit
1426 Data Forcible HDD data clearing
over-
write kit
1427 Data Forcible NVRAM data all
over- clearing
write kit
1428 Data Forcible SRAM backup
over- data all clearing
write kit
1429 User Margin width
interface (Top/Bottom, Left/Right)
1430 User Margin width
interface (Bookbinding margin)
1431 Network ACC
(AT_CASETTE_CHANGE)
for Printer/Box printing
1432 Network Private-print-only mode
© 2005 - 2008 TOSHIBA TEC CORPORATION All rights reserved
Setting mode (08)
Func- <Accept-
Items
tion
ALL
ALL
ALL
ALL
ALL
ALL
100-100>
ALL
ALL
ALL
2 - 157
06/08
Default
RAM Contents
able
value>
0 SYS Select the type of the
<0-2> overwriting level; LOW,
MEDIUM, or HIGH for
deleting HDD data.
(This setting is enabled
only when the GP-1060
is installed.)
0: LOW
1: MEDIUM
2: HIGH
0 SYS Select the type of the
<0-2> overwriting level; LOW,
MEDIUM, or HIGH for
deleting HDD data.
(This setting is enabled
only when the GP-1060
is installed.)
0: LOW
1: MEDIUM
2: HIGH
- - HDD data is cleared in
the procedure set in 08-
1424.
* This setting is
enabled only when
the GP-1060 is
installed.
- - When this code is per-
formed, the equipment
cannot be started up.
* This setting is
enabled only when
the GP-1060 is
installed.
- - When this code is per-
formed, the equipment
cannot be started up.
* This setting is
enabled only when
the GP-1060 is
installed.
Front: 7/ SYS This setting is not
Back: 7 reflected in "Right",
<2-100/- even if the value less
than 2 is set for "Back".
14 SYS
<2-30>
1 SYS 0: ACC prohibited
<0-2> 1: Only in the same
paper direction
2: In both same direc-
tion and different
directions
0 SYS 0: Normal
<0-1> 1: Private-print-only
mode
ERROR CODE AND SELF-DIAGNOSTIC MODE
Pro-
cedur
e
1
1
3
3
3
10
1
1
1
e-STUDIO281c/351c/451c
2