Toshiba e-STUDIO281c Service Handbook page 144

Classifi-
Code
cation
544 Image Environment correction
control control of 2nd transfer
roller bias
545 Image Transfer belt life correction
control of 2nd transfer roller bias
546 Image 2nd transfer roller life cor-
control rection of 2nd transfer
roller bias
548 Transfer Setting of 2nd transfer
roller bias table (for each
destination/paper thick-
ness)
549 Image Image quality control/open-
control loop control 1
550 Image Default setting of Original
mode
551 Image Image quality control/open-
control loop control 2
552 Image Drum life correction control
control
e-STUDIO281c/351c/451c
ERROR CODE AND SELF-DIAGNOSTIC MODE
Setting mode (08)
Func-
Items
tion
ALL
ALL
ALL
ALL
ALL
PPC
(black)
ALL
ALL
2 - 122
Default
<Accept-
RAM
able
value>
1 M Sets whether or not cor-
<0-1> recting the 2nd transfer
roller bias depending on
the environment.
0: Invalid
1: Valid
1 M Sets whether or not cor-
<0-1> recting the 2nd transfer
roller bias depending on
the transfer belt life.
0: Invalid
1: Valid
1 M Sets whether or not cor-
<0-1> recting the 2nd transfer
roller bias depending on
the 2nd transfer roller
life.
0: Invalid
1: Valid
EUR:0 M 0:80 g/m2 (21.3 lb.)/
UC:1 EUR
JPN:2 1: 75 g/m2 (20 lb.)/UC
<0-2> 2: 64 g/m2 (17.1 lb.)/
JPN
1 M Sets whether or not
<0-1> performing the open-
loop control 1.The
open-loop control 1 is
performed in advance
of the closed-loop con-
trol.
0: Invalid
1: Valid
0 SYS 0: Text/Photo
<0-3> 1: Photo
2: Text
3: Gray Scale
1 M Sets whether or not
<0-1> performing the open-
loop control 2.The
open-loop control 2 is
performed before or
during printing.
0: Invalid
1: Valid
1 M Sets whether or not cor-
<0-1> recting the drum volt-
age depending on the
drum life in open-loop
control.
0: Invalid
1: Valid
© 2005 - 2008 TOSHIBA TEC CORPORATION All rights reserved
Pro-
Contents cedur
e
1
1
1
1
1
1
1
1